91̽��

Abstract:

Optimization of the energy levels at the donor–acceptor interface of organic solar cells has driven their efficiencies to above 10%. However, further improvements towards efficiencies comparable with inorganic solar cells remain challenging because of high recombination losses, which empirically limit the open-circuit voltage (Voc) to typically less than 1 V. Here we show that this empirical limit can be overcome using non-fullerene acceptors blended with the low band gap polymer PffBT4T-2DT leading to efficiencies approaching 10% (9.95%). We achieve Voc up to 1.12 V, which corresponds to a loss of only Eg/q − Voc = 0.5 ± 0.01 V between the optical bandgap Eg of the polymer and Voc. This high Voc is shown to be associated with the achievement of remarkably low non-geminate and non-radiative recombination losses in these devices. Suppression of non-radiative recombination implies high external electroluminescence quantum efficiencies which are orders of magnitude higher than those of equivalent devices employing fullerene acceptors. Using the balance between reduced recombination losses and good photocurrent generation efficiencies achieved experimentally as a baseline for simulations of the efficiency potential of organic solar cells, we estimate that efficiencies of up to 20% are achievable if band gaps and fill factors are further optimized.

Abstract:

Hybrid perovskites form an extremely attractive class of materials for large scale, low-cost photovoltaic applications. Fullerene-based charge extraction layers have emerged as a viable n-type charge collection layer, and in “inverted” p–i–n device architectures the solar cells are approaching efficiencies of 20%. However, the regular n–i–p devices employing fullerenes still lag behind in performance. Here, we show that partial solubility of fullerene derivatives in the aprotic solvents used for the perovskites makes it challenging to retain integral films in multilayer solution processing. To overcome this issue we introduce cross-linkable fullerene derivatives as charge collection layers in n–i–p planar junction perovskite solar cells. The cross-linked fullerene layers are insolubilized and deliver improved performance in solar cells enabled by a controllable film thickness.